Bạn đang xem: ag o3
AG06 / AG03 Nicht mehr yên ổn Verkauf
To use an AG series mixer with a computer, software called a "driver" is required.
For Windows operating systems, you must install a driver on your computer so sánh that it will correctly recognize and exchange data with the AG series mixer. For Mac operating systems, standard drivers are already installed on the computer; you tự not need to tướng install a separate driver.
AG DSP Controller will no longer be available with Yamaha Steinberg USB Driver for Windows V2.1.3 or later installed. In this case, please use AG Controller.
1. Download and install the "Yamaha Steinberg USB Driver", which is required for this mixer to tướng be recognized by the computer.
2. After installing the driver, use a USB cable to tướng connect the AG series mixer to tướng a computer. Do not use a USB hub; connect the USB cable directly to tướng the mixer and computer.
3. Turn on the power to tướng the AG series mixer. If you connected and turned on the mixer before installing the driver, leave the mixer powered on and install the driver now.
After installing the driver, make the necessary settings on your computer.
Click [Control Panel] -> [Sound], and then on the [Playback] tab, select [AG06/AG03] and click the [Set Default] button.
1. Select [Applications] -> [Utilities], and then double-click [Audio MIDI Setup].
2. Select [AG06/AG03] from the list on the left side of the [Audio Devices] window. If the [Audio Devices] window is not displayed, in the thực đơn select [Window] -> [Show Audio Window].
3. Control-click [AG06/AG03] in the list, and select [Use this device for sound output].
4. In the same way, control-click [AG06/AG03] in the list, and select [Use this device for sound input]. After completing steps 3 and 4, mic and speaker icons will appear next to tướng the AG series unit in the list.
5. Quit Audio MIDI Setup
6. Turn the [(icon)] level knob to tướng adjust the input level (volume) from the computer. Adjust the balance with the other channels, while turning the two knobs in the [MONITOR] section to tướng adjust the overall volume.
Die Pulte der AG-Reihe werden zusammen mit einem Zugangscode zum Herunterladen der DAW-Software „Cubase AI“ geliefert. Diese Software können Sie mit einem mit dem Internet verbundenen Computer herunterladen.
Xem thêm: na2so4 + ba(oh)2
AG DSP-Controller gibt Ihnen zusätzliche Kontrolle über 1-TOUCH DSP-Parameter.
"Cubasis LE" DAW App for iPad is available at App Store. Connect AG series to tướng your iPad to tướng unlock the feature phối of "Cubase LE". This installation guide covers the tasks required to tướng unlock.
If you registered your "Cubase AI Download Access Code", an Activation Code for WaveLab Cast will be distributed to tướng your "MySteinberg" software page.